|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TLP3520A TOSHIBA Photocoupler GaAs Ired&Photo-Triac TLP3520A Triac Driver Programmable Controllers AC-Output Module Solid State Relay Unit in mm The TOSHIBA TLP3520A consists of a photo-triac optically coupled to a gallium arsenide infrared emitting diode in a 16 lead plastic DIP package. * * * * * Peak off-state voltage: 400 V (min.) Trigger LED current: 10 mA (max.) On-state current: 1.2 Arms (max.) Isolation voltage: 2500 Vrms (min.) Trigger LED current TOSHIBA Trigger LED current (mA) Classification* (IFT5) (IFT7) Standard VT = 6V, Ta = 25C Min. 3/4 3/4 3/4 Max. 5.0 7.0 10 T5 T5, T7 T5, T7, blank Marking of classification 11-20A2 Weight: 1.13 g Pin Configuration (top view) *Ex. (IFT5); TLP3520A (IFT5) (Note) Application type name for certification test, please use standard product type name, i.e. TLP3520A (IFT5): TLP3520A 2 3 4 5 6 2 : ANODE 3 : CATHODE 4,5,6,7 : N.C. 9,13 : TRIAC T2 11 : TRIAC T1 15 : TRIAC GATE 7 15 13 11 9 1 2002-09-25 TLP3520A Maximum Ratings (Ta = 25C) Characteristic Forward current Forward current derating (Ta 53C) LED Peak forward current (100 s pulse, 100 pps) Reverse voltage Junction temperature Off-state output terminal voltage On-state RMS current Detector Ta = 40C Ta = 60C Symbol IF IF / C IFP VR Tj VDRM IT(RMS) IT / C ISP ITSM Tj Tstg Topr Tsol (Note) BVS Rating 50 -0.7 1 5 125 400 1.2 0.9 -15 2 10 120 -40~125 -20~80 260 2500 Unit mA mA / C A V C V A mA / C A A C C C C Vrms On-state current derating (Ta 40C) Peak current from snubber circuit (100s pulse, 120 pps) Peak nonrepetitive surge current (50 Hz, peak) Junction temperature Storage temperature range Operating temperature range Lead soldering temperature (10 s) Isolation voltage (AC, 1 min., R.H. 60%) (Note)Device considered a two terminal: LED side pins shorted together and detector side pins shorted together. Recommended Operating Conditions Characteristic Supply voltage Forward current Peak current from snubber circuit Operating temperature Symbol VAC IF ISP Topr Min. 15 -20 Typ. 20 Max. 120 25 1 80 Unit Vac mA A C 2 2002-09-25 TLP3520A Individual Electrical Characteristics (Ta = 25C) Characteristic Forward voltage LED Reverse current Capacitance Peak off-state current Peak on-state voltage Detector Holding current Critical rate of rise of off-state voltage Critical rate of rise of commutating voltage Symbol VF IR CT IDRM VTM IH dv / dt dv / dt (c) Test Condition IF = 10 mA VR = 5 V V = 0, f = 1 MHz VDRM = 400 V, Ta = 110C ITM = 1.5 A RL = 100 Vin = 120 Vrms (Fig.1) Min. 1.0 200 Typ. 1.15 30 500 5 Max. 1.3 10 100 3.0 25 Unit V A pF A V mA V / s V / s Vin = 120 Vrms, IT = 1.0 Arms (Fig.1) Coupled Electrical Characteristics (Ta = 25C) Characteristic Trigger LED current Capacitance (input to output) Isolation resistance Symbol IFT CS RS VT = 6 V VS = 0, f = 1 MHz VS = 500 V AC, 1 minute Isolation voltage BVS AC, 1 second, in oil DC, 1 minute, in oil Test Condition Min. 5x1010 2500 Typ. 1.5 1014 5000 5000 Max. 10 Unit mA pF Vrms Vdc Fig.1: dv / dt test circuit Rin VCC + 120 2 3 5V,VCC Vin RL dv / dt(c) dv / dt 0V 15 13 11 9 3 2002-09-25 TLP3520A IF - Ta 100 2.0 IT(RMS) - Ta (A) On-state current IT(RMS) 0 20 40 60 80 100 120 Allowable forward current IF (mA) 80 1.6 60 1.2 40 0.8 20 0.4 0 -20 0 -20 0 20 40 60 80 100 120 Ambient temperature Ta (C) Ambient temperature Ta (C) IFP - DR 5000 3000 Pulse width100s Ta = 25C 100 50 30 1000 500 300 Ta = 25C IF - VF Allowable pulse forward current IFP (mA) (mA) Forward current IF 10 5 3 100 50 30 1 0.5 0.3 0.1 0.6 10 3 10-3 3 10 -2 3 10-1 3 100 0.8 1.0 1.2 1.4 1.6 1.8 Duty cycle ratio DR Forward voltage VF (V) VF / Ta - IF -3.2 -2.8 -2.4 -2.0 -1.6 -1.2 -0.8 -0.4 0.1 1000 500 IFP - VFP Forward voltage temperature Coefficient VF / Ta (mV / C) (mA) IFP Pulse forward current 300 100 50 30 10 5 3 1 0.6 Pulse width10s Repetitive frequency = 100Hz Ta = 25C 0.3 0.5 1 3 5 10 30 50 1.0 1.4 1.8 2.2 2.6 Forward current IF (mA) Pulse forward voltage VFP (V) 4 2002-09-25 TLP3520A Normalized IFT - Ta 3 2 VT = 3V 3 2 Normalized IH - Ta Trigger led current IFT (arbitrary unit) Holding current IH (arbitrary unit) 1.2 1 1.2 1 0.5 0.5 0.3 0.3 0.1 -40 -20 0 20 40 60 80 100 0.1 -40 -20 0 20 40 60 80 100 Ambient temperature Ta (C) AMBIENT TEMPERATURE Ta (C) Normalized IDRM - Ta 103 VDRM = Rated 1.4 Normalized VDRM - Ta 10 2 Off-state output terminal voltage VDRM (Arbitrary Unit) Peak off-state current IDRM (Arbitrary Unit) 1.2 1.0 0.8 101 0.6 100 0.4 0 20 40 60 80 100 0.2 -40 -20 0 20 40 60 80 100 Ambient temperature Ta (C) Ambient temperature Ta (C) Normalized LED current - LED Current Pulse Width 10 5 Normalized LED current IF / IFT 3 2 1.6 1.2 1 0.5 0.3 10 30 50 100 300 500 1000 LED current pulse width PW (s) 5 2002-09-25 TLP3520A RESTRICTIONS ON PRODUCT USE * 000707EBC TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. The products described in this document are subject to the foreign exchange and foreign trade laws. The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. The information contained herein is subject to change without notice. * * * * * 6 2002-09-25 |
Price & Availability of TLP3520A |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |